HydraTherm

The new deluxe standard in modern moist heat therapy is here. This HydraTherm Deluxe unit features a rust-free composite polymer tank that will not dent and a unique hot pack storage system with a 12-pack capacity. Setting this unit apart is the electric drainage pump, which empties the tank for cleaning faster and easier than the traditional "hose and gravity" method. This updated design is easy to maintain, as it needs as few as two cleanings a year as compared to 24 each year for traditional stainless tanks. An easier cleaning protocol means saying goodbye to rust, microbial growth and mildew. The easy-to-read, easy-to-set digital thermostat control allows therapists to precisely target the treatment temperature of the water. This feature increases patient safety along with making documentation and record maintenance a simpler task than found on other units. Built to be mobile and space efficient, this unit has four sturdy casters and is sized at 30" x 20" x 33", allowing it to be moved and placed in nearly any location in a facility. The HydraTherm Deluxe has the capacity to hold 12 hot packs. This is the HydraTherm Deluxe device only, without racks or dividers, allowing facilities to customize as they wish. Unit has an adjustable temperature range of 120 degrees to 160 degrees. It is recommended though that users do not exceed 140 degrees for the best therapeutic effect, patient comfort and heat pack longevity. As a terrific feature, the Deluxe includes a fold-away shelf built into the side of the unit. Perfect for prepping a hot pack prior to patient use. The high-grade polymer is temperature resistant, ensuring the exterior of the unit remains safe to the touch and no part of the unit will rust or dent. Without any heat packs in it, the HydraTherm has a water capacity of 18 gallons. When tripped, the low-water sensor automatically deactivates the heating element, reducing fire hazards.

The new deluxe standard in modern moist heat therapy is here. This HydraTherm Deluxe unit features a rust-free composite polymer tank that will not dent and a unique hot pack storage system with a 12-pack capacity. Setting this unit apart is the electric drainage pump, which empties the tank for cleaning faster and easier than the traditional "hose and gravity" method. For easy hot pack retrieval, a unique divider system is included. Made of the same composite as the tank, these pull-out dividers put hot packs within reach with a lift of the divider's handle. This updated design is easy to maintain, as it needs as few as two cleanings a year as compared to 24 each year for traditional stainless tanks. An easier cleaning protocol means saying goodbye to rust, microbial growth and mildew. The easy-to-read, easy-to-set digital thermostat control allows therapists to precisely target the treatment temperature of the water. This feature increases patient safety along with making documentation and record maintenance a simpler task than found on other units. Built to be mobile and space efficient, this unit has four sturdy casters and is sized at 30" x 20" x 33", allowing it to be moved and placed in nearly any location in a facility. The HydraTherm Deluxe has the capacity to hold 12 hot packs. This is the HydraTherm device with divider system and 12 HydraHeat Packs in the following assortment: 3 Large, 3 Universal, 3 Cervical and 3 Oversize. Unit has an adjustable temperature range of 120 degrees to 160 degrees. It is recommended though that users do not exceed 140 degrees for the best therapeutic effect, patient comfort and heat pack longevity. As a terrific feature, the Deluxe includes a fold-away shelf built into the side of the unit. Perfect for prepping a hot pack prior to patient use. The high-grade polymer is temperature resistant, ensuring the exterior of the unit remains safe to the touch and no part of the unit will rust or dent. Without any heat packs in it, the HydraTherm has a water capacity of 18 gallons. When tripped, the low-water sensor automatically deactivates the heating element, reducing fire hazards.

HydraHeat Hot Packs are the latest tool to combat aches and pains from arthritis, back pain, muscle strains, and overall general soreness. HydraHeat packs are part of a complete moist heat therapy system that provide patient comfort, cleanliness and time-efficiency to clinics and facilities. Allowing for a greater area of contact with the skin for heat transfer, the PVC exterior works with the non-toxic gel interior to create a pliable pack that conforms to the treatment area on the body. Due to their unique design, these hot packs provide treatment within the optimal temperature range of 120 degrees to 140 degrees. Once out of the heater, HydraHeat hot packs will retain heat within the therapeutic range for up to 40 minutes. HydraHeat packs have a non-porous skin which allow treatments to occur at lower, safer temperatures. Lower temperatures mean there's no need for a terrycloth cover - just a simple towel or pillowcase is the only barrier needed between the heat pack and the patient. Once done, the hot packs can be easily wiped clean. Because the polymer skin is bacteria resistant, there is less of a risk of bacterial attachment and cross contamination between patients. Even with heavy use, the SureSeam process ensures there is no bursting or leaking from the pack. This is a Standard hot pack, measuring 12" x 10", only. Heating units are available separately. For best results and consistent heating, ensure heat packs are completely submerged in water for a minimum of 20 minutes prior to treatment. While recommended for use with HydraTherm heating units, these packs are compatible with all heating units. For best results, clean the exterior of the heat pack with a non-chlorinated and non-abrasive wipe before placing back in the heating unit. During extended periods when the hot pack will not be in use, it is recommended to remove it from the water and heating unit and be placed on a dry, flat surface. HydraHeat hot packs are Latex free and made in the USA.

HydraHeat Hot Packs are the latest tool to combat aches and pains from arthritis, back pain, muscle strains, and overall general soreness. HydraHeat packs are part of a complete moist heat therapy system that provide patient comfort, cleanliness and time-efficiency to clinics and facilities. Allowing for a greater area of contact with the skin for heat transfer, the PVC exterior works with the non-toxic gel interior to create a pliable pack that conforms to the treatment area on the body. Due to their unique design, these hot packs provide treatment within the optimal temperature range of 120 degrees to 140 degrees. Once out of the heater, HydraHeat hot packs will retain heat within the therapeutic range for up to 40 minutes. HydraHeat packs have a non-porous skin which allow treatments to occur at lower, safer temperatures. Lower temperatures mean there's no need for a terrycloth cover - just a simple towel or pillowcase is the only barrier needed between the heat pack and the patient. Once done, the hot packs can be easily wiped clean. Because the polymer skin is bacteria resistant, there is less of a risk of bacterial attachment and cross contamination between patients. Even with heavy use, the SureSeam process ensures there is no bursting or leaking from the pack. This is a Large hot pack, measuring 17" x 11", only. Heating units are available separately. For best results and consistent heating, ensure heat packs are completely submerged in water for a minimum of 20 minutes prior to treatment. While recommended for use with HydraTherm heating units, these packs are compatible with all heating units. For best results, clean the exterior of the heat pack with a non-chlorinated and non-abrasive wipe before placing back in the heating unit. During extended periods when the hot pack will not be in use, it is recommended to remove it from the water and heating unit and be placed on a dry, flat surface. HydraHeat hot packs are Latex free and made in the USA.

HydraHeat Hot Packs are the latest tool to combat aches and pains from arthritis, back pain, muscle strains, and overall general soreness. HydraHeat packs are part of a complete moist heat therapy system that provide patient comfort, cleanliness and time-efficiency to clinics and facilities. Allowing for a greater area of contact with the skin for heat transfer, the PVC exterior works with the non-toxic gel interior to create a pliable pack that conforms to the treatment area on the body. Due to their unique design, these hot packs provide treatment within the optimal temperature range of 120 degrees to 140 degrees. Once out of the heater, HydraHeat hot packs will retain heat within the therapeutic range for up to 40 minutes. HydraHeat packs have a non-porous skin which allow treatments to occur at lower, safer temperatures. Lower temperatures mean there's no need for a terrycloth cover - just a simple towel or pillowcase is the only barrier needed between the heat pack and the patient. Once done, the hot packs can be easily wiped clean. Because the polymer skin is bacteria resistant, there is less of a risk of bacterial attachment and cross contamination between patients. Even with heavy use, the SureSeam process ensures there is no bursting or leaking from the pack. This is a Cervical hot pack, measuring 17" x 11", only. Heating units are available separately. For best results and consistent heating, ensure heat packs are completely submerged in water for a minimum of 20 minutes prior to treatment. While recommended for use with HydraTherm heating units, these packs are compatible with all heating units. For best results, clean the exterior of the heat pack with a non-chlorinated and non-abrasive wipe before placing back in the heating unit. During extended periods when the hot pack will not be in use, it is recommended to remove it from the water and heating unit and be placed on a dry, flat surface. HydraHeat hot packs are Latex free and made in the USA.

HydraHeat Hot Packs are the latest tool to combat aches and pains from arthritis, back pain, muscle strains, and overall general soreness. HydraHeat packs are part of a complete moist heat therapy system that provide patient comfort, cleanliness and time-efficiency to clinics and facilities. Allowing for a greater area of contact with the skin for heat transfer, the PVC exterior works with the non-toxic gel interior to create a pliable pack that conforms to the treatment area on the body. Due to their unique design, these hot packs provide treatment within the optimal temperature range of 120 degrees to 140 degrees. Once out of the heater, HydraHeat hot packs will retain heat within the therapeutic range for up to 40 minutes. HydraHeat packs have a non-porous skin which allow treatments to occur at lower, safer temperatures. Lower temperatures mean there's no need for a terrycloth cover - just a simple towel or pillowcase is the only barrier needed between the heat pack and the patient. Once done, the hot packs can be easily wiped clean. Because the polymer skin is bacteria resistant, there is less of a risk of bacterial attachment and cross contamination between patients. Even with heavy use, the SureSeam process ensures there is no bursting or leaking from the pack. This is an Oversize hot pack, measuring 17" x 13", only. Heating units are available separately. For best results and consistent heating, ensure heat packs are completely submerged in water for a minimum of 20 minutes prior to treatment. While recommended for use with HydraTherm heating units, these packs are compatible with all heating units. For best results, clean the exterior of the heat pack with a non-chlorinated and non-abrasive wipe before placing back in the heating unit. During extended periods when the hot pack will not be in use, it is recommended to remove it from the water and heating unit and be placed on a dry, flat surface. HydraHeat hot packs are Latex free and made in the USA.

HydraHeat Hot Packs are the latest tool to combat aches and pains from arthritis, back pain, muscle strains, and overall general soreness. HydraHeat packs are part of a complete moist heat therapy system that provide patient comfort, cleanliness and time-efficiency to clinics and facilities. Allowing for a greater area of contact with the skin for heat transfer, the PVC exterior works with the non-toxic gel interior to create a pliable pack that conforms to the treatment area on the body. Due to their unique design, these hot packs provide treatment within the optimal temperature range of 120 degrees to 140 degrees. Once out of the heater, HydraHeat hot packs will retain heat within the therapeutic range for up to 40 minutes. HydraHeat packs have a non-porous skin which allow treatments to occur at lower, safer temperatures. Lower temperatures mean there's no need for a terrycloth cover - just a simple towel or pillowcase is the only barrier needed between the heat pack and the patient. Once done, the hot packs can be easily wiped clean. Because the polymer skin is bacteria resistant, there is less of a risk of bacterial attachment and cross contamination between patients. Even with heavy use, the SureSeam process ensures there is no bursting or leaking from the pack. This is a Universal hot pack, measuring 19" x 5", only. Heating units are available separately. For best results and consistent heating, ensure heat packs are completely submerged in water for a minimum of 20 minutes prior to treatment. While recommended for use with HydraTherm heating units, these packs are compatible with all heating units. For best results, clean the exterior of the heat pack with a non-chlorinated and non-abrasive wipe before placing back in the heating unit. During extended periods when the hot pack will not be in use, it is recommended to remove it from the water and heating unit and be placed on a dry, flat surface. HydraHeat hot packs are Latex free and made in the USA.

This Divider Rack system is for exclusive use with HydraTherm and HydraTherm Deluxe units. Made of the same material composite as the tank, this is a pull-out system where the hot packs are in easy reach just by lifting the handle of the divider. Please note, this is the divider system only. HydraTherm and HydraTherm Deluxe units available separately. Each order contains 5 composite dividers. Includes 3 clip-on shelves that can be attached to the dividers at 4 different height levels. Packaging includes illustrated guide for efficient hot pack placement with dividers. Made of high-grade polymer, the handle of the divider is temperature resistant no matter how hot the water gets. HydraTherm products are made in the USA.